You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 28 Next »

Verification & Validation

Refine the Mesh

Now that we have our results, it is important that we check to see that our computational simulation is accurate. One way to check our results is by refining the mesh further. The smaller the elements in the mesh, the more accurate our simulation will be, but the simulation will take longer. To refine the mesh, look to the outline tree and click Mesh > Body Sizing Change the element sizing to 0.1 (half the size of the mesh we originally tried).

The new mesh looks like:

It has twice as many elements as the original.


Unrefined Mesh

Refined Mesh

Percent Difference

Number of Elements

7763

15052

93.894 %

Max Deformation

0.0010432 m

0.0010538 m

1.016 %

Max Normal Stress

3.7746e5 Pa

3.3744e5 Pa

10.602 %

Because there was relatively little change due to the refinement of the mesh, we have validated our results.

Under Construction



Go to Exercises

Go to all ANSYS Learning Modules

  • No labels