SimCafe

Space shortcuts

Child pages
  • Modal Analysis of a Composite Monocoque - Pre-Analysis & Start-Up
  • Created by user-ac6d9, last modified by user-0108f on Aug 15, 2015

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Author: Jingsi Wu, Cornell University

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Physics Setup
5. Numerical Solution
6. Numerical Results
7. Verification & Validation
Exercises
Comments

Pre-Analysis

The analytical calculation of the problem are explained in this PDF document.  These passages are taken from the isotropic analysis section of "Design, Analysis and Testing of a Formula SAE Carbon Fiber Monocoque Chassis" by Jingsi Wu, Owusu A. Agyeman Badu, and Yongcheng Tai.  

Start-Up

Open ANSYS Workbench

Open ANSYS Workbench by going to Start > All Programs > ANSYS 14.0 > Workbench 14.0. This will open the start up screen as seen below:

Name the project: Modal Analysis of a Composite Monocoque.


Go to Step 2: Geometry

Go to all ANSYS Learning Modules

  • No labels