SimCafe

Space shortcuts

Child pages
  • FLUENT - Supersonic Flow Over a Wedge
10 more child pages
  • Created by user-6c822, last modified by user-a4c52 on Oct 03, 2014

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Supersonic Flow Over a Wedge

Created using ANSYS 13.0

This tutorial has videos. If you are in a computer lab, make sure to have head phones. 

Problem Specification

A uniform supersonic stream encounters a wedge with a half-angle of 15 degrees as shown in the figure below.

The stream is at the following conditions:

Using FLUENT, calculate the Mach Number, static and total pressure behind the oblique shock that will be formed. Also, calculate the shock angle, pressure coefficient along the wedge and drag coefficient. Compare the FLUENT results with the corresponding analytical results.

Go to Step 1: Pre-Analysis & Start-Up

Go to all FLUENT Learning Modules

  • No labels