Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Current »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Important Note

Prior, to attempting this tutorial, you must complete the Cantilever Beam Tutorial. The Cantilever Beam Tutorial covers the static structural analysis for the same geometry. If you have not yet completed the Cantilever Beam Tutorial, please do so now.

Cantilever Beam Modal Analysis

Created using ANSYS 13.0

Problem Specification

Consider an aluminum beam that is clamped at one end, with the following dimensions.

Length

4 m

Width

0.346 m

Height

0.346 m

The aluminum used for the beam has the following material properties.

Density

2,700 kg/m^3

Youngs Modulus

70x10^9 Pa

Poisson Ratio

0.35

Using ANSYS Workbench find the first six natural frequencies of the beam and the mode shapes.

Go to Step 1: Pre-Analysis & Start-up

Go to all ANSYS Learning Modules

  • No labels