You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 50 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Turbulent Pipe Flow

Created using ANSYS 13.0

Problem Specification

Let's revisit the pipe flow example considered in the previous exercise. As before, the inlet velocity is 1 m/s, the fluid exhausts into the ambient atmosphere and density is 1 kg/m3. For µ = 2 x 10 -5 kg/(ms), the Reynolds no. based on the pipe diameter and average velocity at the inlet is

Unknown macro: {latex}

\large
$$

Unknown macro: {Re}

=

Unknown macro: {rho VD over mu}

= 10,000
$$

This change of viscosity has taken us from a Reynolds number of 100 to 10,000. At this Reynolds number, the flow is usually completely turbulent.

We'll solve this problem numerically using ANSYS FLUENT. Among the results we'll look at are centerline velocity, skin friction coefficient and the axial velocity profile at the outlet.

Go to Step 1: Pre-Analysis & Start-Up

Go to all FLUENT Learning Modules

  • No labels