Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Pre-Analysis & Start-Up
Pre-Analysis
One simple hand-calculation that we can do now before even starting our simulation is to find theoretical wind velocity at the tip. We can then later compare our answer with what we get from our simulation to verify that they agree.
The velocity, v, on the blade should follow the formula
Unknown macro: {latex}
\begin
Unknown macro: {equation*}
v=r \times \omega_{}
\end
Plugging in our angular velocity of -2.22 rad/s and using the blade length of 43.2 meters plus 1 meter to account for the distance from the root to the hub, we get
Unknown macro: {latex}
\begin
Unknown macro: {equation*}
v=-2.22\mathbf{\hat{k}} \times -44.2\mathbf{\hat{i}}
=98.124\ \mathrm
Unknown macro: {m/s}
\ \mathbf{\hat{j}}
\end
Start-Up
*Insert video
It will cover:
-Opening ANSYS
-Setting up the project schematic for the geometry and the Fluid flow, naming them.
Under Construction