AutoCAD Floc Called Inputs

Inputs Needed to Call the Flocculation Tank Program

H_Floc - Height of the flocculator tank

H_FlocPort - Height of the floc port

H_InletChannel - Height of the inlet channel

Plant_Origin - The origin point of the treatment plant

• x: 0
• y: 0
• z: 0

T_FlocBaffle - Thickness of the baffle material

T_PlantWall - Thickness of the sed and floc tank walls

L_FlocTank - total length of the floc tanks

L_Sed - Length of one sed tank

N_FlocChannels - Number of channels in the floc tank

N_SedTanks - Number of sed tanks

W_FlocChannel - Width of a single floc channel

W_InletChannel - Width of the inlet channel

W_Sed - Width of a single sed tank, including the width of the dividing walls

L_FlocBaffles - Matrix of baffle lengths

X_FlocBaffles - Array of the distance from the inside wall of the floc tank (on the side of the plant that has the inlet channel to the sed tank) to the baffle closest to that end of the sed tank

Z_FlocBaffles - Array of the elevation of the bottom of each baffle