You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Numerical Results

In FLUENT, go to File-Write-Case&Data at the top menu.

Open CFD-POST and click File-Load Results. Select the data file that you just wrote as the file to load.

Create contours of:

  • Stream Function
  • Progress Variable
  • Temperature
  • Mass Fraction of CH4
  • Turbulent Flame Speed

To do this, click the Contour button at the top menu 

In the pop up dialogue box, name the contour after the variable that it will display and press OK. For all contour plots, select "periodic 1" for the location, and increase the number of contours to 51. Change the drop down box under Variable to the variable that you would like to create the contour of. Press "Apply" to generate the contour, and repeat this process for all contours. 


Stream Function:


Progress Variable:


Temperature:


Mass Fraction of CH4:


Turbulent Flame Speed:


Go to Verification & Validation

Go to all FLUENT Learning Modules

  • No labels