You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Unable to render {include} The included page could not be found.

Under Construction!!

4. Setup (Physics)

Launch FLUENT.

(Double Click) Setup in "Unsteady Flow", the duplicate project. Select Double Precision, and if using a computer with multiple cores, select parallel, and set the number of cores to be used.

Then click OK

Transient

In this step here we will, tell FLUENT to solve for the unsteady flow. As you can see, by default FLUENT will solve for the steady flow.

Problem Setup > General. Set Time to Transient.

Specify Material Properties

To achieve a Reynolds number of 120, as required in the problem statement, we will change the material viscosity, to 8.333*10^-3 kg/m*s.

Problem Setup > Materials > Fluid > Create/Edit.... Set the viscosity to 8.333*10^-3 kg/m*s. Click Change/Create.

Then click Close.

Save Project



Go to Step 5: Solution

See and rate the complete Learning Module

Go to all FLUENT Learning Modules

  • No labels