You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Numerical Results

Deformed Shape

The following video shows how to plot the deformed shape and use it to check if the displacement constraints have been applied correctly.


Unknown macro: {latex}
Unknown macro: {bf $sigma_x$}
Contours">
Unknown macro: {latex}
Unknown macro: {bf $sigma_x$}
Contours

We next take a look at

Unknown macro: {latex}

$\sigma_x$

variation in the model.


You can save an image of the contours to a file using the instructions below.


Below, we take a closer look at the

Unknown macro: {latex}

$\sigma_x$

variation on the front face and compare it to what we expect from beam bending theory.


We interrogate

Unknown macro: {latex}

$\sigma_x$

variation in the interior of the model using "section planes".


Unknown macro: {latex}

$

Unknown macro: {bf sigma_x}

$

alongaLineusing"Path"Operations">
Unknown macro: {latex}

$

Unknown macro: {bf sigma_x}

$

along a Line using "Path" Operations

First, we create two coordinate systems which we'll use to define the start and end points of the line.


Second, we create the desired line on the front face.


Last, we extract

Unknown macro: {latex}

$\sigma_x$

along the line and export the results to an Excel file.



[*Go to Step 7: Verification & Validation*]

Go to all ANSYS Learning Modules

  • No labels