You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Physics Setup

Recall that during the Start-Up step, we added a material with the desired values of Young's modulus and Poisson's ratio. This just added the material to the list of materials available within this project. We need to assign this material from the material list to the model as shown in the following video. Otherwise, ANSYS will use the Young's modulus and Poisson's ratio for structural steel which is the default. This step is easy to overlook.


Next, we apply the boundary conditions i.e. displacement constraints at the 3 left holes and traction on part of the right hole. Boundary surfaces where we neither apply a displacement constraint nor traction are assumed by ANSYS to be free surfaces with zero traction.



Go to Step 5: Numerical Solution

Go to all ANSYS Learning Modules

  • No labels