Prantil et al

ANSYS Tutorials from Prantil et al

The ANSYS tutorials below are from the following book:

Prantil, V. C., Papadopoulos, C. and Gessler, P. D., Lying by Approximation: The Truth About Finite Element Analysis, Morgan and Claypool (2013).

These tutorials are for ANSYS release 14.0 and use ANSYS Workbench and ANSYS Mechanical applications.

Unknown macro: {table-plus}

1.	[A stepped shaft in axial tension]
2.	[A non-slender cantilever beam under point tip loading]
3.	[Hoop and axial stresses in thick-walled pressure vessels]
4.	[A four-point bend test on a T-beam]
5.	[Planar approximations for a two-dimensional beam analysis]
6.	[Three-dimensional analysis of combined loading in a signpost]