T-Beam: Mesh

The following video shows how to create a mesh for the 2D geometry. We stick with the default "Q8" elements (eight nodes per element including mid-side nodes). The element edge sizes are controlled by inserting a "face sizing".

We improve the mesh obtained above by refining the mesh in the transition region between the larger and smaller cross-sections where stress concentration is expected. We do so by:

• Decreasing the Curvature Normal Angle which sets the maximum allowable angle that one element edge is allowed to span
• Decreasing the Min Size which sets the minimum allowable element edge size
  

Continue to Step 4 - Physics Setup

Go to all ANSYS Learning Modules