SimCafe

Space shortcuts

Child pages
  • Modal Analysis of a Composite Monocoque - Numerical Results

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Unable to render {include} The included page could not be found.

Problem Specification
1. Pre-analysis & Start-Up
2. Geometry
3. Mesh
4. Setup(Physics)
5. Solution
6. Results
7. Verification & Validation

Results

Ansys results for tangential displacement is shown in the picture below:

The maximum tangential deformation occurs at the tip of the suspension links, which is reasonable, and the tangential value is 0.66598 inches.

Go to Step 7 - Verification & Validation
Go to all ANSYS Learning Modules

  • No labels