SimCafe

Space shortcuts

Child pages
  • ANSYS - Modal Analysis of a Composite Monocoque
7 more child pages

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Unable to render {include} The included page could not be found.

Problem Specification
1. Pre-analysis & Start-Up
2. Geometry
3. ACP(Pre)
4. Mesh and Setup
5. Mechanical Solution
6. Mechanical Results
5. ACP(Post) Solution
6. ACP(Post) Results
8. Verification & Validation

Problem Specification

One of the important measure in race car design is torsional stiffness. To obtain that specification, a twist test must be performed on the Chassis. Here is a simplified version of race car chassis with a composite monocoque and two front suspension links. To simulate a twist test, the back of the monocoque will be fixed while coupling will be applied tot he end of the two front suspension. the .igs file for the geometry can be monocoque.IGS. 

Go to Step 1 - Pre-Analysis & Start-Up
Go to all ANSYS Learning Modules

  • No labels