SimCafe

Space shortcuts

Child pages
  • FLUENT - Nasal Airway Model
7 more child pages
  • Created by user-c6244, last modified by Unknown User (bjk97) on Feb 16, 2013

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Unable to render {include} The included page could not be found.

Author: Brandon Kovarovic, Cornell University

This tutorial is designed to show the process of extracting a nasal airway cavity geometry from a set of CT scans using Materialize MIMICs software. The tutorial also explains meshing the geometry in ICEM CFD and solving the model in FLUENT.

This process was created for my Masters of Engineering research which the goal is to model and quantify nasal reconstruction surgical procedures. Comparing the various surgical techniques using CFD results will help surgeons determine the proper procedure for the type of nasal airway obstruction in the patient.

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Problem Specification

Goals
1- Process the set of CT Scan images
2- Extract the Geometry of the cavity using MIMICs software
3- Mesh the created STL file in ANSYS ICEM CFD
4- Solve the model in FLUENT
5- Compare the pressure and shear stress on the nasal wall

Anatomy
Understanding the nasal anatomy is essential in determining the proper geometry for the model. The nasal airway cavity is a very complex structure extending from the nostrils at the anterior of the head, to the nasopharynx at the posterior of the throat. For a reference the cavity extends all the way to the uvula in the back of your throat, so your nasal cavity extends deep inside the skull. The right and left nostril are separated by the septum, a membrane that is mostly cartilage in the anterior of the nose but becomes a thin bone in the posterior of the cavity. Air flow enters the nose through the nostrils, entering vertically and the flow is redirected horizontally with the curvature of the nose. The nose itself contains flaps of cartilage that act as valves, during a deep inhale the sides of the nose collapse controlling flow.

The most complex section of the geometry is nasal concha or turbinates that occupy most of the cavity. These bones are long finger-like shelves in the nasal passage, extending from the top of the exterior nose to the nasopharynx. There are three sets of concha, inferior, middle and superior. Viewing the skull from the coronal plane, like you are facing the patient, shows that these concha are actually curved. These concha serve to distribute the incoming air and also warm and moisten the air before entering the lungs. Additionally there are four sets of sinuses around nasal cavity, which for this study will be removed from the geometry. The entrance of the sinuses into the nasal cavity is relatively small and does not impact the flow in cavity to any great extent.

Go to Step 1 - Pre-Analysis & Start-Up
Go to all FLUENT Learning Modules

  • No labels