Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Unable to render {include} The included page could not be found.

Problem Specification

In this exercise, we will examine the stresses and deformation of a wind turbine blade under a force load.

Click here to enlarge imageVisit page in new window

The blade is composed of an outer surface and an inner spar. The spar is 0.02 meters thick and the outer surface is of varying thickness. A table containing the material properties of the two parts is below.


Spar

Outer Surface

Young's Modulus (Pa)

2e11

2e11

Poisson's Ratio

0.30

0.30

Thickness (m)

0.02

0.03 - 0.00048485*X

We are now ready to open ANSYS Workbench

Go to Step 1 - Pre-Analysis & Start-Up
See the complete Learning Module
Go to all ANSYS Learning Modules

  • No labels