SimCafe

Space shortcuts

Child pages
  • High Resolution FE Model of Bone - Pre-Analysis & Start-Up

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Unable to render {include} The included page could not be found.

Problem Specification
1. Pre-analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Pre-analysis & Start-Up

Before you proceed, you need to download the Abaqus input file.

download the Abaqus file here

Open ANSYS Workbench:

We will import the Abaqus input file into Finite Element Modeler and convert it into a model that ANSYS can simulate.

Expand Component Systems in the Toolbox. Locate Finite ElementModeler and drag it into Project Schematic:


click here for full view

Right click on Model > Add Input Mesh > Browse, and locate the Abaqus input file.


click here for full view

You should see a refresh symbol next to Model. This means the input file has been loaded and FE modeler is ready to generate a geometry. Double click on Model to launch the FE Modeler.

Go to Step 2 - Geometry
Go to all ANSYS Learning Modules

  • No labels