SimCafe

Space shortcuts

Child pages
  • Radiation Between Surfaces - Geometry

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Unable to render {include} The included page could not be found.

Problem Specification
1. Pre-analysis & Start-up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Create the shell

In project Schematic, double click on Geometry to open the Design Modeler. When prompted, select Milimeter as the unit.

Click on the XY Plane and the z axis to begin sketching. Use the line Linetool to create a vertical line from the x axis. Hover the cursor around the axis until you see a symbol C to begin your sketch. The symbol C means the line is coincident to the x axis.

Go to Step 3 - Mesh
Go to all ANSYS Learning Modules

  • No labels