Sign-up for free online course on ANSYS simulations!Author: Ben Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Results
Now, we will look at the results of the simulation.
Temperature
In the Outline window, click the temperature solution we created. you should see the following
The temperature is 122 degrees Celsius throughout, which is to be expected.
Total Deformation
In the Outline window, click the deformation solution we created. you should see the following
The temperature is 122 degrees Celsius throughout, which is to be expected.