Unable to render {include} The included page could not be found.
Author: Ben Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Solution
Deformation
To add deformation to the solution, first click Deformation > Total to add the total deformation to the solution. It should appear in the outline tree.
to add the solution sub menu to menu bar. Now in the solution sub menu clickStress
In the solution sub menu, select Stress > Equivalent (von-Mises). In the details pane, ensure Geometry is set to All Bodies.