Mesh

Launch the Mesher

Now that we have completed creating the geometry of the domain, we are ready to mesh it. Return to the Project Schematic Window. In the Project Schematic window, double click the Mesh box to launch the mesher.

Mapped Face Meshing

First we will apply a mapped face meshing. First, in the Outline window, click Mesh to show the Mesh menu in the menu bar. In the Meshing Menu, select Mesh Control > Mapped Face Meshing. In the Graphics window, click on the domain face to select it, then in the Details window, click Geometry > Apply.

Edge Sizing

To create the edge sizings, go to Mesh Control > Sizing. Next, we need to select the edge selection filter