Sign-up for free online course on ANSYS simulations!Author: John Singleton, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Important Note
Prior, to attempting this tutorial, you must complete the Cantilever Beam Tutorial, which is a static structural analysis of a cantilever beam with the same geometry. If you have not yet completed the Cantilever Beam Tutorial, please do so now.
Problem Specification
Consider an aluminum beam that is clamped at one end, with the following dimensions.
Length |
4 m |
|---|---|
Width |
0.346 m |
Height |
0.346 m |
The aluminum used for the beam has the following material properties.
Density |
2,700 kg/m^3 |
|---|---|
Youngs Modulus |
70x10^9 Pa |
Poisson Ratio |
0.35 |
Using ANSYS Workbench find the first six natural frequencies of the beam and the mode shapes.
Go to Step 1: Pre-Analysis and Start-up
See and rate the complete Learning Module
Go to all ANSYS Learning Modules