Author: John Singleton and Rajesh Bhaskaran, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Important Note
Prior, to attempting this tutorial, you must complete the Cantilever Beam Tutorial . If you have not yet completed the Cantilever Beam Tutorial, please do so now.
Problem Specification
Consider an aluminum beam that is clamped at one end, with the following dimensions.
Length |
4 m |
---|---|
Width |
0.346 m |
Height |
0.346 m |
The aluminum used for the beam has the following material properties.
Density |
2,700 kg/m^3 |
---|---|
Youngs Modulus |
70x10^9 Pa |
Poisson Ratio |
0.35 |
Using ANSYS Workbench find the first six natural frequencies of the beam.
Go to Step 1: Pre-Analysis and Start-up
See and rate the complete Learning Module
Go to all ANSYS Learning Modules