You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

2. Geometry

Attach Geometry from Cantilever to Cantilever Modal

The geometry for the "Cantilever Beam Modal Analysis" tutorial is the same as the geometry for the "Cantilever Beam" tutorial. Instead of recreating the geometry, we will simple attach the geometry from the Static Structural Analysis System (Cantilever) to the Modal Analysis System (Cantilever Modal). In order to attach the geometry, left click geometry in the "Cantilever" project and drag it to geometry in the "Cantilever Modal" project, as shown below.


Higher Resolution ImageVisit page in new window


Then release the left mouse button. You should now see that the geometries are shared as shown in the following image.


Higher Resolution ImageVisit page in new window




Go to Step 3: Mesh

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels