You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Author: John Singleton and Rajesh Bhaskaran, Cornell University

Problem Specification
[1. Pre-Analysis & Start-Up]
[2. Geometry]
[3. Mesh]
[4. Setup (Physics)]
[5. Solution]
[6. Results]
[7. Verification and Validation]
[Exercises]

Unknown macro: {note|title='blahblah'}

Prior, to attempting this tutorial, you must complete the [Cantilever Beam Tutorial] . If you have not yet completed the [Cantilever Beam Tutorial], please do so now.

Problem Specification

Consider an aluminum beam that is clamped at one end, with the following dimensions.

Length

4 m

Width

0.346 m

Height

0.346 m

The aluminum used for the beam has the following material properties.

Density

2,700 kg/m^3

Youngs Modulus

70x10^9 Pa

Poisson Ratio

0.35

Using ANSYS Workbench find the first six natural frequencies of the beam.

[Go to Step 1: Pre-Analysis and Start-up]

[See and rate the complete Learning Module]

Go to all ANSYS Learning Modules

  • No labels