Sign-up for free online course on ANSYS simulations!Author: John Singleton and Rajesh Bhaskaran, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
3. Mesh
Open Mechanical
Generate Default Mesh
First, click on Mesh in the tree outline. Next, (click) Mesh > Generate Mesh as shown below.
Size Mesh
In this section we will size the mesh, such that it has ten uniform elements. In order to size the mesh, first expand Sizing located within the
Details of "Mesh" table. Next, set Element Size to 0.40 m.
Details of "Mesh". Then set
Details of "Mesh" table.
Go to Step 4: Setup (Physics)
See and rate the complete Learning Module
Go to all ANSYS Learning Modules