ANSYS 12 - Cantilever Beam Modal Analysis - Geometry

2. Geometry

Attach Geometry from Cantilever to Cantilever Modal

The geometry for the "Cantilever Beam Modal Analysis" tutorial is the same as the geometry for the "Cantilever Beam" tutorial.
In order to attach the geometry, left click geometry in Cantilever and drag it to geometry in Cantilever Modal, as shown below.



Then release the left mouse button. You should now see that the geometries are shared as shown in the following image.

Go to Step 3: Mesh

See and rate the complete Learning Module

Go to all ANSYS Learning Modules