Sign-up for free online course on ANSYS simulations!Author: John Singleton and Rajesh Bhaskaran
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Under Construction!!
6. Results
Velocity Vectors
Results > Graphics and Animations > Contours > Set Up...
Stream Lines
Vorticity
Drag Coefficient
Reports > Result Reports > Forces > Setup
Then, click Print. The command pane will now display the following results: the pressure force, the viscous force, the total force, the pressure force coefficient, the viscous force coefficient and the drag force coefficient. As one can see from the following image link, FLUENT yields 2.04 for the value of the drag coefficient.
Go to Step 7: Verification & Validation
See and rate the complete Learning Module
Go to all FLUENT Learning Modules