Sign-up for free online course on ANSYS simulations!Author: John Singleton and Rajesh Bhaskaran
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Under Construction!!
5. Solution
Convergence Criterion: Turn off Drag, Turn on Lift
{Solution > Monitors > Double Click) > Drag > Edit.... Then uncheck Print to Console and uncheck Plot. Click ok
{Solution > Monitors > Double Click) > Lift > Edit.... Then check Print to Console and Plot. Click ok
Go to Step 6: Results
See and rate the complete Learning Module
Go to all FLUENT Learning Modules