Author: John Singleton and Rajesh Bhaskaran
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Under Construction!!
Setup (Physics)
Launch Fluent
(Double Click) Setup in the color:#660099}Workbench Project Page. Select Double Precision. Then click OK
Specify Material Properties
Problem Setup > Materials > Fluid > Create/Edit.... Then set the Density to 1 kg/m^3 and set Viscosity to 0.05 kg/m*s. Click Change/Create then click Close.
Boundary Conditions
FarField1
Problem Setup > Boundary Conditions > farfield1. Set Type to velocity-inlet. Click Edit.... Set Velocity Specification Method to Components, set X-Velocity to 1 m/s, and set Y-Velocity to 0 m/s.
FarField2
Problem Setup > Boundary Conditions > farfield2.. Set Type to pressure-outlet.
Cylinder Wall
Problem Setup > Boundary Conditions > cylinderwall. Set Type to wall.
Reference Values
Problem Setup > Reference Values. Set the color:#660099}Density to 1 kg/m^3. The other default values will work for the purposes of this simulation.
Go to Step 5: Solution
See and rate the complete Learning Module
Go to all FLUENT Learning Modules