Author: John Singleton and Rajesh Bhaskaran
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Under Construction!!
Setup (Physics)
Launch Fluent
(Double Click) Setup. Select Double Precision. Then click OK
Specify Material Properties
Problem Setup > Materials > Fluid > Create/Edit.... Then set to Density to 1 kg/m^3 and set Viscosity to 0.05 kg/m*s. Click Change/Create then click Close.
Go to Step 5: Solution
See and rate the complete Learning Module
Go to all FLUENT Learning Modules