ANSYS 12 - Plane Frame - Solution

5. Solution

At this point the items in which we want ANSYS to solve for will be conveyed to ANSYS.

Deformation

It is of interest to have the total deformation, the deformation in the x direction and the deformation in the y direction. In order to solve for the total deformation right click on "Solution", then click "Insert", then click "Deformation" and lastly click "Total" as shown below.


Now, the two directional deformations will be specified. Right click on "Solution", then click "Insert", then click "Deformation", and lastly click "Directional" as shown below. Repeat the instructions in the previous sentence to create a second directional deformation.


Now, rename "Directional Deformation" to "X Deformation" and rename "Directional Deformation 2" to "Y Deformation" as shown in the image below.


Next, click on "Y Deformation" and change the "Orientation" to the "Y Axis" as shown below.

Go to Step 6: Results

See and rate the complete Learning Module

Go to all ANSYS Learning Modules