Sign-up for free online course on ANSYS simulations!Unable to render {include} The included page could not be found.
2. Geometry
Double-click on the geometry button, 
, in the Project Schematic area, which should launch the Design Modeler in ANSYS. Choose meter as the desired length unit. A folder called "A: Static Structural (ANSYS) should be expanded in the tree outline of the Design Modeler. If it is not expanded, then expand it now.
Proper Orientation
Click once on the XYPlane button, 
. Next, click once on the royal blue Z vector (displayed below) which should be in the bottom right section of the Design Modeler window.
Now, you should be looking directly at the XY plane and the axises in the bottom right corner should be oriented as they are in the image below.
Line Sketching
First, click on the sketching tab, 
, which is located underneath the "Tree Outline". Next , click on the rectangle button, 
, and draw a rectangle somewhere above the x axis in the top right quadrant of the XY Plane as shown below.
Next, click the line button, 
, and draw two vertical lines that connect the bottom left and the bottom right corners of the rectangle to the x axis. Remember that a "P" should appear when the mouse is directly over a rectangle corner and a "V" should appear when the line your drawing is vertical. Lastly, make sure that a "C" appears before you click on the x axis to terminate the line segments. You should now have an image comparable to the one below.
Dimensioning
Now, the dimensions of the plane frame structure will be inputted into ANSYS. The plane frame structure has symmetry in its geometry, so "equal length" constraints will be used in order to shorten the dimensioning process. First, click on the "Constraints" tab, 
, then click on the "Equal Length" button, 
. Now, click on the two vertical sides of the rectangle you drew, then click on the two vertical lines you drew. Next, click on the "Dimensions" tab, 
, and select "General", 
. Now, click on bottom left vertical line and click once more to place the marker. Repeat this action with the upper left vertical line and the top horizontal line. Your Design Modeler window should look similar to the image below.
Now, the lengths need to be inputted. Input the length of the sides in "Details View" table. Input 3m for the length of the two vertical dimensions, and input 4m for the length of the horizontal line as shown below.
