You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Unable to render {include} The included page could not be found.

Problem Specification

Consider the planar truss structure in the image below. All the truss elements are made out of the rare and exotic material, Cornellium which has a Young's Modulus of 2.08x10^10 and a Poisson's Ratio of 0.3 . The cross section of each truss member is 0.346m x 0.346m.


Go to Step 1: Pre-Analysis & Start-Up

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels