ANSYS 12 - Cantilever Beam - Exercises

Exercises

Exercise 1: Distributed Load

Using ANSYS, find the deformation and maximum bending stress of the beam when the load is applied as a distributed load. The 8 kN load is applied uniformly across the span of the beam. Thus, the line force is 8kN/4m=2kN/m.

Hint: In order to carry out this exercise you can duplicate your original Static Structural project and then modify the duplicate. In the modifications you need to delete the original transverse force and apply the distributed load. In order to apply the distributed load right click on Static Structural, then select Insert and then click on Line Pressure as shown in the image below.


You will then need to apply the line pressure to the line, specify the magnitude and direction of the line pressure and lastly have ANSYS solve the system.

Exercise 2: Axial & Transverse Loading

In ANSYS, find the deformation and the stress of the beam when it is experiencing axial and transverse loading. Compare these results to those of the original problem.


Hint: Once again, you can make a duplicate of the original Static Structural and then modify the duplicate. In order to carry out the computations you will need to add the axial force to the beam and then have ANSYS solve the system.

Return to Problem Specification

See and rate the complete Learning Module

Go to all ANSYS Learning Modules