You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Under Construction

This Exercise Section is UNDER CONSTRUCTION

 

Unable to render {include} The included page could not be found.

Exercises

Exercise 1: Distributed Load

Using ANSYS, find the deformation and maximum bending stress of the beam when the load is applied as a distributed load. That is, the 8 kN are applied uniformly to the beam as shown in the image below.

Hint: A distributed load of 8kN applied over 4m yields a line force of 2kN/m. The following small image may lead you in the right direction .

Exercise 2: Axial Load

In ANSYS, find the deformation and the stress of the beam when the load is applied axially instead of transversely.


Return to Problem Specification

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels