You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

Unable to render {include} The included page could not be found.

Step 5: Solution

Solve For The Displacements

In order to solve for the displacements click on the solve button, , which is located near the top of the Setup window. This process may take some time depending on the quality of the computer you are working with, so please be patient. After the computation process is completed exit the Setup window.

Post-Processing

First, click on the solution button, , in the workbench window. Next, right click on the "Solution (A6)" folder, then click insert, then click Beam Tool and finally click Beam Tool as shown in the image below.

Click Here For Higher ResolutionVisit page in new window



Next, right click on the "Beam Tool" folder that you have just added, then click on insert, then click on Beam Tool, then click on stress and finally click on Maximum Bending Stress as shown below.

Click Here For Higher ResolutionVisit page in new window



In order to get ANSYS to execute the post-processing you must click the solve button, , again.

Go to Step 6: Results

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels