Sign-up for free online course on ANSYS simulations!Unable to render {include} The included page could not be found.
3. Mesh
Open the Model
Right click on model, 
, in the Workbench window then click on "Edit..." as shown below.
Expand "Model (A4)", 
, if it is not already expanded. Then, click once on mesh, 
.
Specify the Element Size
Next, expand sizing under "Details of "Mesh"" if it is not already expanded. Finally, change the element size to 2 meters and click enter. The total length of the bar is 4 meters, and the element size was set to 2 m, thus the mesh will be composed of two elements. (On a side note, if ten elements were desired, then the element size would be set to 4m/10=0.4m.) Then, click on Update, 
. At this point you should see, a similar image to the one below.
