Models for a Single Baffle
Simulation Models were created to compare the flow results for two geometries:
- Single baffle with sharp corners
- Single baffle with round corners
The gallery below shows results for Static Pressure contours and Velocity Vectors for these geometries. As expected the pressure drop is larger for the case of straight corners.
Models for a Two Baffles
- Single baffle with sharp corners
- Single baffle with round corners
The gallery below shows results for Static Pressure contours and Velocity Vectors for these geometries. As expected the pressure drop is larger for the case of straight corners.
These results are only preliminary. To validate them we plan to take the following steps:
- Set a standard outlet pressure for all geometries
- Perform a mesh sensitvity analysis
- Compare Simulation results to experimental data
| There are no images attached to this page. |