Floating Flocs

Overview

Floating flocs in the sedimentation tanks of AguaClara plants in Tamara, Ojojona, and Marcala result in polluted effluent water. While some treatment plants use floating floc to treat water, AguaClara plants rely on flocs settling out at the bottom. The cause of the problem is thought to be bubbles forming on floc particles due to supersaturation of influent water, which occurs when the total dissolved gas pressure is greater than the local solution pressure. The goal of the Floating Floc team is to find an efficient and cost-effective approach to remove excess gas from water and to implement that method in current and future AguaClara plants to improve the sedimentation process.

Currently, the Floating Floc team is conducting research with a back-washed sand filter to remove excess gas from the water in the grit chamber before it reaches the sedimentation tank. Placing sand in the water would provide a surface area other than the floc particles on which bubbles can form to leave the water. The aim is to remove enough gas from the water in the grit chamber, so that the water entering the sedimentation tank has a lower bubble forming potential. Previous research focused on quantifying the effectiveness of different sand grain sizes at gas removal. Current research focuses on observing and quantifying the effectiveness different bed depths and bed expansions. Since natural bodies of water vary in dissolved gas concentration throughout the year, we also plan to observe the effects of the influent dissolved air concentration on gas removal.

Floating Flocs Team Semester Goals and Meeting Minutes
Floating Flocs Team Research Proposal
Floating Flocs Team [Future Challenges]

Current Research

[Floating Flocs Sand Filter Method]

• The sand filter approach involves forcing water upward through a layer of sand, as if backwashing a sand filter. The sand filter method provides a substance besides the sediment in the water on which the bubbles can form. When the bubbles grow large enough, they will rapidly rise to the surface.

Additional Information

Floating Flocs Aeration Method

• This page discusses past research on the aeration approach to dissolved oxygen removal. The aeration approach attempted to use bubbles as a catalyst to increase the rate of dissolved oxygen transfer out of solution by allowing dissolved oxygen to diffuse into the bubbles. This would increase the bubble size and cause the bubble to rise faster.

Theoretical Modeling of Aeration Method

• This page discusses the theory behind the Aeration method and contains mathematical models predicting air flow through orifices of different sizes and variable length pipes.

Floating Flocs Team Annotated Bibliography

Aeration Method Quiz
This quiz checks that you have a basic understanding of the principles behind this research.