Sign-up for free online course on ANSYS simulations!UNDER CONSTRUCTION
Author: Daniel Kantor and Andrew Einstein, Cornell University
Problem Specification
1. Create Geometry in GAMBIT
2. Mesh Geometry in GAMBIT
3. Specify Boundary Types in GAMBIT
4. Set Up Problem in FLUENT
5. Solve!
6. Analyze Results
7. Refine Mesh
Problem 1
Problem Specification
Unable to render embedded object: File (pb_img001.jpg) not found.
The purpose of this tutorial is to illustrate the setup and solution of a turbulent flow past a sphere. Flow past a sphere is one of the classical problems of fluid mechanics. For this problem, we will be looking at Reynolds number of 1.14E6.
Unknown macro: {latex}
\large
$$
Unknown macro: {Re}
=
Unknown macro: {rho VD over mu}
$$
We know D = 6. To obtain Re = 1.14E6, we can arbitrarily set ρ, V and μ, but will use the standard values in Fluent. For our case, let's set ρ = 1.225 kg/m 3 , V = 2.7754 m/s and μ = 1.7894E-05 kg/ms.
Preliminary Analysis
For Re = 1.14E6, we are looking at turbulent flow. What will be the velocity profile of this flow? What will be the drag coefficient of the cylinder? What will be the pressure coefficient around cylinder? How will the streamlines around cylinder look like?
Let's start the modeling in our quest to find out the answer!
We'll create the geometry and mesh in GAMBIT which is the preprocessor for FLUENT, and then read the mesh into FLUENT and solve for the flow solution.
Go to Step 1: Create Geometry in GAMBIT
[See and rate the complete Learning Module]