Unable to render {include} The included page could not be found.
Author: Ranjith Tirunagari, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Step 7: Verification & Validation
In order to verify the LES solution to the turbulent pipe flow problem, we will compare it against the solution obtained using standard k-e model.
Turbulent Pipe with k-e model
In the Workbench Project Page, left-click on the downward pointing arrow on the top-left corner of the "TurbulentPipeLES" project and select Duplicate from the drop down menu as shown in the figure below.
Click here for higher resolution
A new project will be created. Rename this new project as "TurbulentPipeRANS" as shown in figure below.
Go to Problem Specification
Go to all FLUENT Learning Modules