Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3
Panel

Author: Rajesh Bhaskaran & Yong Sheng Khoo, Cornell University

Problem Specification
1. Pre-Analysis & Start-up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Problem 1
Problem 2

...

This will bring up the Specify Boundary Types window on the Operation Panel. We will first specify that the left edge is the inlet. Under Entity:, pick Edges so that GAMBIT knows we want to pick an edge (face is default).

...

Now select the left edge by Shift-clicking on it. The selected edge should appear in the yellow box next to the Edges box you just worked with as well as the Label/Type list right under the Edges box.

Next to Name:, enter inlet.

For Type:, select WALL.

Click Apply. You should see the new entry appear under Name/Type box near the top of the window.

...

You should have the following edges in the Name/Type list when finished:

Save and Export

...

Main Menu > File > Export > Mesh...

Type in nozzle.msh for the File Name:. Select Export 2d Mesh since this is a 2 dimensional mesh. Click Accept.

Check nozzle.msh has been created in your working directory.

Go to Step 4: Setup (Physics)

See and rate the complete Learning Module

Go to all FLUENT Learning Modules