Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin
Panel

Problem Specification
1. Start-up and preliminary set-up
2. Specify element type and constants
3. Specify material properties
4. Specify geometry
5. Mesh geometry
6. Specify boundary conditions
7. Solve
8. Postprocess the results
9. Validate the results
Problem Set 1

Problem Set 1

Problem Statement

We used a 4-node quad element (PLANE42) in the tutorial. ANSYS also offers a 8-node quad element (PLANE82). Re-solve the tutorial problem using the PLANE82 element. Compare plots of the nodal and element solution of the von Mises stress for the two cases. You may use either mesh for this problem (although the final results presented here are done using the coarser mesh).

Hints

Look at the steps and think about which ones you have to change.

When you remesh the object, notice the following changes:
Image Removed
 

Image Added

newwindow
Higher Resolution Image
Higher Resolution Image
https://confluence.cornell.edu/download/attachments/90092092/Mesh+PB1.jpg?version=1

The number of nodes has increased!

To see why, do:

Main Utility Menu > PlotCtrls > Multi-plot Ctrls ...

Click OK. Then on the Multi-Plotting Window that comes up, deselect everything but Nodes and Elements.


 

Click OK.

Then go to Plot >  Multi-Plots

In the Graphics Window, you will now see the nodes in between the lines. There are 8 points for each quadrilateral area instead of the four we had before!


 

Final Result

Here are the Nodal and Element Solutions you should have gotten:

Nodal Solution
  Image Removed
 

(Click picture for larger image)

Element Solution
  Image Removed
 

(Click picture for larger image)

Image Added

newwindow
Higher Resolution Image
Higher Resolution Image
https://confluence.cornell.edu/download/attachments/90092092/pb1_VM_Nodalsolution.jpg?version=1

Element Solution

Image Added

newwindow
Higher Resolution Image
Higher Resolution Image
https://confluence.cornell.edu/download/attachments/90092092/pb1_VM_Elementsolution.jpg?version=1

Back to Problem Specification

See and rate the complete Learning Module

Go to all ANSYS Learning ModulesBack to Problem Specification