...
For example: if you wanted to make a square with a height and length of 1, your file would look like this:
Zone | Point | X | Y | Z |
---|---|---|---|---|
1 | 1 | 0 | 0 | 0 |
1 | 2 | 0 | 1 | 0 |
2 | 1 | 0 | 1 | 0 |
2 | 2 | 1 | 1 | 0 |
3 | 1 | 1 | 1 | 0 |
3 | 2 | 1 | 0 | 0 |
4 | 1 | 1 | 0 | 0 |
4 | 2 | 0 | 0 | 0 |
Flow outside of the boundary layer is inviscid and you will need to change this in your Model Setup.
...
What happens to the velocity at the outlet when we account for the displacement thickness? Compare your FLUENT results from this exercise to the results from the tutorial and the Blasius solution, what is happening to the velocity profile at the outlet?
Mesh file: flat_plate_mesh.wbpz
Go to Comments