Physics Setup

We need to assign this material from the material list create a new material and assign it to the model as shown in the following video. Otherwise, ANSYS will use the Young's modulus and Poisson's ratio for structural steel which is the default. This step is easy to overlook.  Next, we apply the boundary conditions i.e. displacement constraints at the 3 left holes and traction on part of the right hole. Boundary surfaces where we neither apply a displacement constraint nor traction are assumed by ANSYS to be free surfaces with zero traction.

...

• Change the material from default to a newly created material
• Change the properties of the new material to those of Al 6061-T6 in the problem description
• Create a fixed support at the three holdsholes
• Create a force acting on the inside facing circular hole
• Specify the y-component to be 100lbf

...

• Solve the physics

Go to Step 5: Numerical SolutionResults

Go to all ( ANSYS or FLUENT) AIM Learning Modules