Physics Setup

We need to create a new material and assign it to the model as shown in the following video. Otherwise, ANSYS will use the Young's modulus and Poisson's ratio for structural steel which is the default. This step is easy to overlook.  Next, we apply the boundary conditions i.e. displacement constraints at the 3 left holes and traction on part of the right hole. Boundary surfaces where we neither apply a displacement constraint nor traction are assumed by ANSYS to be free surfaces with zero traction.

<iframe width="560" height="315" src="" frameborder="0" allowfullscreen></iframe>


Summary of steps in above video:

Go to Step 5: Numerical Results

Go to all ANSYS AIM Learning Modules