Pre-Analysis & Start-Up

Pre-Analysis

In the Pre-Analysis step& Start-Up step, we'll review the following:

• Mathematical model: (e.g.: We'll look at the governing equations + boundary conditions and the assumptions contained within the mathematical model.)
• Numerical solution procedure in ANSYS: (e.g.: We'll briefly overview the solution strategy used by ANSYS and contrast it to the hand calculation approach.)
• Model: We will look at the initial field function of the jet as well as the formula for calculating Stokes number in this case.
• Expected Results: We will discuss the expected results from this simulation and compare the numerical results with the expected results.Hand-calculations of expected results: (e.g.: We'll use an analytical solution of the mathematical model to predict the expected stress field from ANSYS. We'll pay close attention to additional assumptions that have to be made in order to obtain an analytical solution.)

Mathematical Model 

{latex}
1+1=2

{latex}

Numerical Solution Procedure in ANSYS

...

Expected Results

...

...

Note
Under Construction

Go to Step 2: Geometry

Go to all (ANSYS or FLUENT) Learning Modules