Page History

...

From the Sketching tab, use the Circle tool to draw a circle centered at the origin. Again, Make sure your cursor displays a P near the origin before you begin sketching. Next, use the Line tool to draw two lines along the X and Z axis. We only need to create a quarter of the full sketch to create the 1/8 model. Select the Trim tool and click on any sketch outside the quarter circle enclosed by the lines and the full circle. Use the Radius dimtension tool to set the radius of the quarter circle to 4 mm.

Image Removed
click here for full view

trim.jpg

The size of the specimen compared to the shell:

Image Removedquarter circle.jpg

Click on the Extrude icon and select the quarter circle for the geometry. In the Details of Extrude1 window, set the Depth to 15 mm.

...

You should see 2 Parts, 2 Bodies in the Tree Outline. Your model should look like the following:

Image Modified

You may now close the Design Modeler and move on to the next step.

Go to Step 3: Mesh

...